Utax CD 1028 Instruction Handbook Manual Download Page 153

Page: 153 / 435

Sending Functions

5-20

OPERATION GUIDE

Press the

key. WSD Scan appears.

Press the

key to select [From Oper. Panel].

Select the destination computer from the computer
list.

Press [Detail] (the

Right Select

key) to see the

information of the selected computer.

Press the

key to confirm the destination, and

then press the

Start

key. Transmission starts.

NOTE:

To change the destination computer, press the

Back

key and then press [Yes] (the

Left Select

key).

This brings you back to step 6.

NOTE:

To use WSD Scan from your computer, press

[From Computer] in step 5 and then scan the original
from the computer.

WSD Scan:

From Computer

*********************

[ Exit

]

Select Computer:

*********************

Computer02

Computer03

[ Cancel ] [ Detail ]

Press Start Key.

:Computer01

Summary of Contents for CD 1028




















































































































































































































































































































































































































































Search results

Summary of Contents for CD 1028

Reviews:

Utax CD 1028, Instruction Handbook Manual, Page: 153 / 435

Search results

Summary of Contents for CD 1028

Reviews: