Utax CD 1028 Instruction Handbook Manual Download Page 208

Page: 208 / 435

Default Setting (System Menu)

OPERATION GUIDE

8-23

Media for Auto Selection

When [Auto] is selected in Paper Selection, the paper source that is automatically selected can be limited by
media types.If

Plain

is selected, the paper source with plain paper loaded in the specific size is selected. Select

[All Media Types] for the paper source with any kind of paper loaded in the specific size.

Use the procedure below to select the paper size and media type used by Auto Selection.

In the Sys. Menu/Count. menu, press the

key to select [Common Settings].

Press the

key. The Common Settings menu

appears.

Press the

key to select [Orig./Paper Set.].

Press the

key. The Orig./Paper Set. menu

appears.

Press the

key to select [Media for Auto].

Press the

key. Media for Auto appears.

Press the

key to select [All Media Type] or

the paper type to be used for paper selection.

Press the

key.

Completed.

is displayed and the

screen returns to the Orig./Paper Set. menu.

Sys. Menu/Count.:

User/Job Account

User Property

*********************

[ Exit

]

Common Settings:

*********************

Default Screen

Sound

[ Exit

]

Orig./Paper Set.:

*********************

Def. Orig. Size

Custom PaperSize

[ Exit

]

Media for Auto:

All Media Type

*********************

Transparency

Summary of Contents for CD 1028




















































































































































































































































































































































































































































Search results

Summary of Contents for CD 1028

Reviews:

Utax CD 1028, Instruction Handbook Manual, Page: 208 / 435

Search results

Summary of Contents for CD 1028

Reviews: