manualshive.com logo in svg

Utax CD 1028, Instruction Handbook Manual, Page: 353 / 435

Share
Download
Utax CD 1028 Instruction Handbook Manual Download Page 353

Troubleshooting 

10-8

OPERATION GUIDE

Send error.
####

–

1105: E-mail - The SMTP protocol 
setting is turned off. Use 

Embedded 

 Web Server

 and turn on the SMTP 

protocol setting.
Scan to PC (SMB) - SMB setting is 
turned off. Use 

Embedded  Web Server 

 

and turn on the SMB setting.
Scan to PC (FTP) - FTP setting is 
turned off. Use 

Embedded  Web Server 

 

and turn on the FTP setting.
1106: The sender address setting 
under E-mail: SMTP is not registered. 
Use 

Embedded  Web Server

 and 

register the sender address.
2101, 2102, 2103, 2201, 2202, 2203, 
3101: The network cable is 
disconnected or the hub that it is 
connected to is not operating 
properly. Check the cable and the 
hub. Otherwise, the server name or 
the host name of the SMTP server is 
not set correctly. Use 

Embedded  Web  

Server

 and register the SMTP 

server name and the host name 
correctly.
2204: The E-mail size exceeds the 
acceptable send data capacity. 
Decrease the size or resolution of the 
scanned data to be transmitted and 
resend the E-mail.
5101, 5102, 5103, 5104, 7102, 720f: 
Turn the main power switch off and 
back on. If this error occurs several 
times, make a note of the displayed 
error code and contact your service 
representative.(Refer to the 
corrective action for the error 
message “ An error has occurred.”)
9181: The scanned original exceeds 
the acceptable number of pages of 
999. Send the excess pages 
separately.

—

—

—

Error occurred. 
Turn the main power 
switch off and on.

–

System error has occurred. Turn the 
main power switch off and on.

—

Incorrect account ID.

–

The Account ID does not match. 
Check the registered Account ID.

—

Error Message

Checkpoints

Corrective Actions

Reference 

Page

Summary of Contents for CD 1028




















































































































































































































































































































































































































































Reviews:

No comments