Utax CD 1028 Instruction Handbook Manual Download Page 150

Page: 150 / 435

Sending Functions

OPERATION GUIDE

5-17

File Name Entry

This setting allows you to assign a document name to scanned images. You can specify a default for the
document name.

Use the procedure below to assign names to scanned documents that you are sending.

Press the

Send

key.

Place the originals on the platen.

Press the

Function Menu

key. Function Menu

appears.

Press the

key to select [File Name Entry].

Press the

key. File Name Entry appears.

NOTE:

Refer to

Character Entry Method on Appendix-

for details on entering characters.

Enter the file name, press the

key. Additional

Info. appears.

NOTE:

Refer to

Character Entry Method on Appendix-

for details on entering characters.

Enter the date, job number, etc. on the screen, and
then press the

key.

NOTE:

Refer to

Character Entry Method on Appendix-

for details on entering characters.

Completed.

is displayed and the screen returns to

the basic screen for sending.

Specify the destination, and press the

Start

key to

start sending.

Function Menu:

*********************

Original Size

Original Image

[ Exit

]

File Name Entry:

File_2009

ABC

[ Text

]

Summary of Contents for CD 1028




















































































































































































































































































































































































































































Search results

Summary of Contents for CD 1028

Reviews:

Utax CD 1028, Instruction Handbook Manual, Page: 150 / 435

Search results

Summary of Contents for CD 1028

Reviews: