Utax CD 1028 Instruction Handbook Manual Download Page 117

Page: 117 / 435

Copying Functions

4-4

OPERATION GUIDE

Paper Selection

Select the paper source that contains the required paper size.

NOTE:

Specify in advance the size and type of the paper loaded in the cassette (refer to

Original/Paper

Settings on page 8-8

Selecting the Cassette

Use the procedure below to select the paper supply cassette.

Press the

Copy

key.

Place the originals on the platen.

Press the

Function Menu

key. Function Menu

appears.

Press the

key to select [Paper Selection].

Press the

key. Paper Selection appears.

Press the

key to select the desired paper

size.

If [Auto] is selected, the paper matching the size of
the original is selected automatically.

Press the

key.

Completed.

is displayed and the screen returns to

the basic screen for copying.

Press the

Start

key to start copying.

Function Menu:

*********************

Collate

Duplex

[ Exit

]

Paper Selection:

*********************

Letter

Plain

Custom

Plain

Summary of Contents for CD 1028




















































































































































































































































































































































































































































Search results

Summary of Contents for CD 1028

Reviews:

Utax CD 1028, Instruction Handbook Manual, Page: 117 / 435

Search results

Summary of Contents for CD 1028

Reviews: