Utax CD 1028 Instruction Handbook Manual Download Page 361

Page: 361 / 435

Troubleshooting

10-16

OPERATION GUIDE

If the paper is jammed inside the fuser unit, open
the fuser cover and remove the paper by pulling it
out.

Close the rear cover, and open and close the top
cover to clear the error. The machine warms up and
resumes printing.

Optional Document Processor

Follow the steps below to clear paper jams in the optional document processor.

Remove all of the originals from the document feed
tray.

Open the left cover of the document processor.

Remove the jammed original.

If the original is caught in the rollers or difficult to
remove, proceed to the next step.

Summary of Contents for CD 1028




















































































































































































































































































































































































































































Search results

Summary of Contents for CD 1028

Reviews:

Utax CD 1028, Instruction Handbook Manual, Page: 361 / 435

Search results

Summary of Contents for CD 1028

Reviews: