Utax CD 1028 Instruction Handbook Manual Download Page 371

Page: 371 / 435

Management

11-8

OPERATION GUIDE

Enter the user name and press the

key, enter

the login user name in the next screen, and then
press the

key.

Press the

key to select [Exit] and then

press the

key.

Select [Detail] and press the

key to see

information of the registered users.

In Local User List, press the

key to select

the added user and then press the

key.

Press the

key to select [Login Password:],

press [Edit] (the

Right Select

key), enter the login

password, and then press the

key.

Enter the same login password to confirm and
press the

key.

Press the

key to select [E-mailAddress:], press

[Edit] (the

Right Select

key), enter the e-mail

address, and then press the

key.

Press the

key to select [Access Level:], press

[Change] (the

Right Select

key), select the user

access privilege, and then press the

key.

NOTE:

If the user list is for device administrator,

[Change] is not displayed.

User Name:

ABC

[ Text

]

User01:

*********************

Detail

Local User List:

DeviceAdmin

Admin

*********************

[ Menu

]

Detail:

3/6

OOOOOOOOOOO

[ Edit

]

Detail:

E-mailAddress: 4/6

******@abcdef.jp

[ Edit

]

Detail:

Access Level:

5/6

Administrator

[ Change ]

Summary of Contents for CD 1028




















































































































































































































































































































































































































































Search results

Summary of Contents for CD 1028

Reviews:

Utax CD 1028, Instruction Handbook Manual, Page: 371 / 435

Search results

Summary of Contents for CD 1028

Reviews: