UniPOS
Interactive Fire ControlPanel IFS7002
Instruction Manual
Page
25
Revision 2.05
Of 107
12.2.1. Menu
Faults
Use the menu to display detailed information for faults in the fire control panel and in addressable
devices.
Menu
Faults
contains the following subordinate menus:
−
Меню
Total
– displays information for all fault conditions;
−
Menu
Zones
– displays information only for zones in fault condition;
−
Menu
Devices
– displays information only for devices in fault condition;
−
Menu
Outputs
– displays information only for outputs in fault condition (monitored outputs and
addressable output devices).
The four subordinate menus
have identical layout. If no faults are
detected (or no faults of a specific
type are detected) the following
screen appears:
If faults are detected, the following
screen appears:
Each message can be displayed
in a few lines – from 1 to 4. It brings
out the following information
−
Text for the type of the fault –
this information is mandatory;
−
Information for the device
(zone – if the device is fire
detector, loop and address) –
in case the fault condition is
in an addressable device;
−
Text message for the zone –
visualized if the fault
condition is in an addressable
fire detector;
−
Text message for the device
– visualized if the fault condition is in an addressable device.
Buttons
and
situated in the right panel section scroll the pages up and down – next page
or previous page (if any are available). One page contains two messages for fault condition.
Mode:DAY
11:44:29
Thu 03 Feb 2005
FIRE CONTROL PANEL IFS7002
UniPOS
Faults Total: 00003
Disables Total: 000
Failed Outputs: 00000
Disabled Outputs: 000
List/Faults/Total 0003
0001 Fault in Zone 003
Zone: Zone 003
0002 Removed Device
Zone003 Loop001 Addr003
Zone: Zone 003
Addr: Point 1.003
Mode:DAY
11:45:23
Thu 03 Feb 2005
FIRE CONTROL PANEL IFS7002
UniPOS
List/Faults/Total
NO FAULTS
