background image

UniPOS 

Interactive Fire ControlPanel IFS7002 

Instruction Manual 

Page 

46 

Revision 2.05 

Of 107 

  Where records of events for 

the specified period are 
available – the record of the 
first (the most recent) event: 

 

Buttons 

 and 

 on the right 

panel section are enabled if more 
than one record is available in the 
archive; they allow the user to switch 
between the next and the previous 
record (if any). 

Using the digit buttons to enter in 

the 

Go to 

field a random 4-digit 

number for the event in the selected 
filter. To edit the number press 

button 

 and the last digit will be 

deleted. 

Press button 

 to display the record whose number is in the 

Go to 

field: 

  If no number is entered or the number is 0, the first (the most recent) record will be selected; 

  If the number is higher than the actual numbers of all records in the archive, the last (the 

oldest) record will be selected. 

Simultaneously, the number in the 

Go to 

field is deleted. 

12.3. Menu 

System functions

 

The menu contains the following subordinate menus and functions: 

 Disables; 

  Zones in test; 

 Set Clock; 

 Set Mode; 

  Check LEDs and Buzzer. 

 
Access to the subordinate menus 

is allowed at Access Level 2, so as 
soon as you enter the menu, a 
screen for password will appear: 

 
 
Enter the password using the 

digit buttons – press a button to 
insert a digit on the place of the 
cursor „_”; the previous text and the 
cursor move one position to the right. 
Move the cursor to the left or to the 

right using buttons 

 and 

Press the button 

 to delete: 

  The digit under the cursor; 

 The digit to the left of the 

cursor if no digit is available 
under the cursor. 

The maximum length of the password is 10 symbols. If you press a digit button after the 10-

symbol password is entered, the digit is not accepted and will not be entered. 

С

 

Mode:DAY

16:01:09

 

Fri 18

Ма

r 2005

FIRE CONTROL PANEL  IFS7002 

UniPOS 

 
 

 
 

PASSWORD   Level 2 

 
  Enter 

password: 

 
 
 
 
 

0

1

2

3

4

5

9

С

С

 

Mode:DAY

14:26:19

 

Fri 18

Ма

r 2005

FIRE CONTROL PANEL IFS7002 

UniPOS 

 
 

 
 

Archive Between dates  Records 0011   

    Go to:_ 

 
0001 Record N

о

 0004 Fault in mains supply 

     19:01:46  Thursday  17-03-2005 
 
 
 
 

 

0

1

2

3

4

5

9

:

С

Summary of Contents for IFS7002












































































































Reviews: