UniPOS IFS7002 Instruction Manual Download Page 60

Page: 60 / 107

UniPOS

Interactive Fire ControlPanel IFS7002

Instruction Manual

Page

Revision 2.05

Of 107

13.5.1. Menu

Devices

The menu allows the user to integrate (to include) a device in a zone and to exclude a device

from a zone. It contains the following submenus and screens:

−

Screen

List of devices

;

−

Screen

Set zone as free

;

−

Remove address

;

−

Remove address range

;

−

Add address

;

−

Add address range

If no devices are present in the zone (free zone) screen

Set zone as free,

Remove address,

and menu

Remove address range

are not accessible. If 60 devices are already added to the zone

(the zone is full), the menu

Add address

and menu

Add address range

are not accessible.

13.5.1.1. Screen

List of devices

The screen displays a list of fire

detectors included in the zone. For
each devices is displayed the loop
where it is included and the device
address in the loop:

If no fire detectors are integrated in the zone, a screen with the text message

Free zone

appears.

13.5.1.2. Screen

Set zone as free

The command screen

Set zone

as free

allows the user to remove all

devices from the zone.

Press button

to remove

the devices from the zone and to exit
the screen.

Mode: DAY

13:28:25

Wed 23 Mar 2005

SetUp Zone 1

Set Zone as free

Warning!

All addresses will be removed from the Zone!

–

confirm

–

cancel

Mode: DAY

13:19:31

Wed 23 Mar 2005

SetUp Zone 1

List of devices

Total: 17

Lp1

ddr1 Lp2

ddr110

Lp1

ddr2 Lp2

ddr114

Lp1

ddr3

Lp1

ddr4

Lp1

ddr10

Lp1

ddr11

Lp2

ddr1

Lp2

ddr2

Lp2

ddr6

Lp2

ddr7

Lp2

ddr12

Lp2

ddr13

Lp2

ddr14

Lp2

ddr16

Lp2

ddr17

Summary of Contents for IFS7002












































































































Search results

Summary of Contents for IFS7002

Reviews:

Related manuals for IFS7002

Brands by name

Popular brands

UniPOS IFS7002, Instruction Manual

Search results

Summary of Contents for IFS7002

Reviews:

Related manuals for IFS7002

Brands by name

Popular brands