UniPOS
Interactive Fire ControlPanel IFS7002
Instruction Manual
Page
29
Revision 2.05
Of 107
12.2.3.2.
Zone Status
If no disables of specific type are
available the following screen
appears:
If disables are available the status of
the first zone in Test Mode is
displayed:
Each message is displayed in
two lines, under the
Status
text
message:
−
The first line displays zone
number and status;
−
The line beneath displays text
message for the zone.
Buttons
and
in the right
panel section allow the user to
display the status of the next or the
previous zone (if any are available) in
Test Mode.
Press a button with figure and
the field
Go to
situated on the
heading of the panel is activated,and you can enter a random 3-digit number of the zone. To correct
the number use button
; the button deletes the last digit you entered.
As soon as you enter a number in the field
Go to,
press button
to display the status of the
specified zone:
−
If you select zone number 0, the status of Zone 1 will be displayed;
−
If you select zone number higher than 250, the status of Zone 250 will be displayed;
−
If the selected zone is not set to Test Mode, a text message NOT IN TEST appears; the text
message for the zone is not displayed;
−
The number in the
Go to
field is deleted, i.e. the field is deactivated.
Mode:DAY
14:03:36
Mon 07 Mar 2005
FIRE CONTROL PANEL IFS7002
UniPOS
List/Test/Zone status
Go to:
Zones in Test - Total 003
Status:
Zone001 Normal
Zone 001
0
1
2
3
4
5
6
7
8
9
С
Mode:DAY
10:12:28
Mon 07 Mar 2005
FIRE CONTROL PANEL IFS7002
UniPOS
List/Test/Zone Status
NO ZONES IN TEST
0
1
2
3
4
5
6
7
8
9
С
С
