UniPOS
Interactive Fire ControlPanel IFS7002
Instruction Manual
Page
51
Revision 2.05
Of 107
−
If some zones in test are
available, the first zone in test
will be displayed, and in the
panel bottom section will
appear the text message of
the zone:
Buttons
and
seen in the
right panel section allow the user to
switch between the next and the
previous zone in test (if any).
Using the digit buttons you may
enter in the
Go to
field a random 3-
digit number of the zone. To edit the
number press button
and the last
entered digit will be deleted.
When you press button
after a number is entered in the
Go to
field, the status of the zone
whose number is selected, will be displayed:
−
If the selected number is 0, the status of Zone 1 will be displayed;
−
If the selected number is higher than 250, the status of Zone 250 will be displayed.
−
If the zone has not been formed yet, instead of text message of the zone appears
Disabled
zone;
−
If the zone has not been formed yet, instead of text message of the zone appears
Free zone;
Simultaneously, the number in the
Go to
field will be deleted; i.e. the field is deactivated.
By pressing the button
the zone status is alternatively changed from
IN TEST
to
NOT IN
TEST
and reverse, and in the bottom left section appears the reminder
Data not saved
. The changes
(enable/disable test operation in fire alarm zone) take effect if button
is pressed (and the
Go to
field is empty); then the reminder
Data not saved
is cleared.
12.3.3. Function
Set Clock
The function is used to set the
real time clock of the control panel to
the correct time. Enter the function to
display the screen:
Calendar date, day of the week,
the time and the value of the
calibration index are visualized, as
per the moment when the function
was activated. The cursor is located
over the first position in the first line
(Date).
Buttons
and
in the right
panel section allow the user to move
between the lines on the screen.
To set the correct date and time
(line one and three) use:
−
The digit buttons – to enter a specific digit on the position of the cursor;
−
Buttons
and
– to move the cursor one position to the left or one position to the right.
Mode:DAY
15:56:31
Mon 21 Mar 2005
FIRE CONTROL PANEL IFS7002
UniPOS
System functions/Clock
Date (dd-mm-yy):
2
1-03-05
Day: Monday
Time (hh:mm:ss):15:56:31
Calibration: +10
0
1
2
3
4
5
6
7
8
9
С
С
Mode:DAY
15:19:22
Mon 21 Mar 2005
FIRE CONTROL PANEL IFS7002
UniPOS
System functions/Test/Zones
Go to:
Zones in test - total 002
ZONE: 001
IN TEST
Zone 001
0
1
2
3
4
5
6
7
8
9
С
