UniPOS
Interactive Fire ControlPanel IFS7002
Instruction Manual
Page
19
Revision 2.05
Of 107
The operation of button
is:
−
If a wrong password is entered – the entered digits will be deleted and the cursor will appear
over the password’s first position;
−
If one of the 10 passwords for Access Level 2 or the password for Access Level 3 is entered:
♦
The fire control panel will exit the Fire condition;
♦
The fire control panel will exit Information and Control Mode if it was in a combination
of Fire condition and Information and Control Mode.
To exit the screen press buttons
(Exit) or
(Cancel). Then, if the fire control panel had
been in a combination of Fire condition and Information and Control Mode, it would exit Information
and Control Mode.
8.3.4.2. Access Level 2
At Access Level 2 press the button
and the fire control panel will exit Fire condition and
Information and Control Mode.
8.3.5. Buttons
(Move down) and
(Move up)
8.3.5.1. Panel for zones in fire condition
Where suppressed messages for zones in fire condition are available they can be displayed in the
text fields of the first (upper) panel on the LCD display, by the means of buttons
and
situated
in the panel’s right section.
Button
appears on the display where a message for a zone in Fire condition following the
message in the first text field is suppressed. Press the button to display it. When the last suppressed
text message for a zone in Fire condition is reached, the button
disappears.
Button
appears on the display where a message for a zone in Fire condition preceding the
message in the first text field is suppressed. Press the button to display it. When the first suppressed
text message for a zone in Fire condition is reached, the button
disappears.
If a suppressed message for a zone in Fire condition is displayed, 20 s after the last button is
pressed, the message for the first zone in fire condition will be automatically restored.
8.3.5.2. Panel for devices in Fire condition
Where suppressed messages for devices in Fire condition are available, they are displayed in the
two text fields of the second (middle) panel, by the means
р
of buttons
and
situated in the
right part of the panel.
Button
is activated if the numbers of the messages in the second and the third field are not
consecutive. When you press the button
you will display the consecutive messages for devices in
Fire condition, in the first and second text fields.
Button
is activated if the number of the message in the first text field is higher than 1. When
you press the button
you will display the previous messages for devices in Fire condition, in the
first and second text fields of the middle panel.
8.3.6. Button
(Menu)
Press the button to enter Information and Control Mode; the mode uses the middle and the
bottom panel of the screen for Fire condition.
