UniPOS
Interactive Fire ControlPanel IFS7002
Instruction Manual
Page
62
Revision 2.05
Of 107
13.5.1.4. Menu
Remove address range
The menu allows the user to
remove a group of devices from the
zone, having consequent addresses
in a single loop:
For each group of devices the
user shall enter:
−
The loop where the group is
included in – if no value is
entered, by default will be
accepted Loop 1;
−
The address of the first
device in the group – if no
value is entered by default
will be accepted Address 1;
−
The address of the last
device in the group – if no
value is entered by default
will be accepted Address 1.
When you press button
a
screen with warning message
appears:
Press button
to remove
from the zone devices included in the
group. The screen displays:
−
If some devices are still in the
zone – a screen for the
selection of a group of
devices for removal, and the
most recent data are saved;
−
If no devices are left in the
zone – a screen with the text
message
Free zone
; the only
option is to exit the menu.
In both cases the number of the removed devices from the zone is displayed in the bottom section of
the panel.
Mode: DAY
10:05:51
Thu 24 Mar 2005
SetUp Zone 1
Remove address range
Warning!
From the Zone will be removed Devices:
Loop:
1
From
address:
5
To
address:
7
–
confirm
–
cancel
Mode: DAY
9:40:40
Thu 24 Mar 2005
SetUp Zone 1
Remove address range
Total:
17
Loop: _
From address:
To address:
0
1
2
3
4
5
6
7
8
9
С
