Toyota TNS350 Owner'S Manual Download

Page: 95 / 260

TNS 350

ADVANCED FUNCTIONS

— Editing memory points

The icon, attribute, name, location and/or

telephone number of a registered memory

point can be edited.

1. Push the “MENU” button.
2. Touch “Setting” on the “MENU”

screen.

3. Touch “Memory” on the “Setting”

screen.

4. Touch “Edit”.

5. Touch the desired memory point

button.

6. Touch the touch-screen button to be

edited.

“Icon”:

To select icons to be displayed on

the map. (See page 95.)

“Quick access”:

To set an attribute.

Memory points with a set attribute can be

used as a “Quick access” or “Home” touch-

screen button. (See page 96.)

“Name”:

To edit memory point names.

The names can be displayed on the map.

(See page 97.)

“Location”:

To edit location information.

(See page 97.)

“Phone no.”:

To edit telephone numbers.

(See page 98.)

7. Touch “OK”.

Summary of Contents for TNS350





































































































































































































































































Search results

Summary of Contents for TNS350

Reviews:

Related manuals for TNS350

Brands by name

Popular brands

Toyota TNS350, Owner'S Manual

Search results

Summary of Contents for TNS350

Reviews:

Related manuals for TNS350

Brands by name

Popular brands