Toyota TNS350 Owner'S Manual Download

Page: 108 / 260

ADVANCED FUNCTIONS

● Speed camera Warning

When you approach a speed camera, a

warning is given with a beep and an icon.

The legal speed limit on the road you are

travelling on is also displayed along with

an icon. The timing at which the warning is

given varies from road to road.

Speed camera icon

The legal speed limit on the current
road

To turn the “Speed camera” mode on:

1. Push the “MENU” button.
2. Touch “Setting” on the “MENU”

screen.

3. Touch “Navigation” on the “Setting”

screen.

4. Touch “On” of “Speed camera”.

The selected button is highlighted.

5. Touch “OK”.

INFORMATION

● This function cannot be used in

countries where the disclosure of

information about speed cameras

is prohibited by law.

● The version of the speed camera

data is displayed on the “Map

SD” screen. For how to display

the “Map SD” screen, see “ —

Confirming the database version

and SD memory card coverage

area” on page 251.

Summary of Contents for TNS350





































































































































































































































































Search results

Summary of Contents for TNS350

Reviews:

Related manuals for TNS350

Brands by name

Popular brands

Toyota TNS350, Owner'S Manual

Search results

Summary of Contents for TNS350

Reviews:

Related manuals for TNS350

Brands by name

Popular brands