Toyota TNS350 Page 194 Owner'S Manual Download

Page: 194 / 260

AUDIO SYSTEM

● Tone and balance
Tone

How good an audio program sounds to

you is largely determined by the mix of the

treble, midrange, and bass levels. In fact,

different kinds of music and vocal programs

usually sound better with different levels of

treble, midrange, and bass.

Balance

A good balance of the left and right stereo

channels and of the front and rear sound

levels is also important.
Keep in mind that if you are listening to a

stereo recording or broadcast, changing the

right/left balance will increase the volume

of one group of sounds while decreasing

the volume of another.

1. Display the audio control screen.

See “

●

Displaying the audio control screen”

on page 192.

2. Touch “Sound”.

3. Touch the desired touch-screen

button.

“Treble” “+” or “–”:

Adjusts high-pitched

tones.

“Mid” “+” or “–”:

Adjusts mid-pitched

tones.

“Bass” “+” or “–”:

Adjusts low-pitched

tones.

“Front” or “Rear”:

Adjusts sound balance

between the front and rear speakers.

“L” or “R”:

Adjusts sound balance

between the left and right speakers.

4. Touch “OK”.

The tone of each mode (for such as AM, FM

and Bluetooth

audio) can be adjusted.

Summary of Contents for TNS350





































































































































































































































































Search results

Summary of Contents for TNS350

Reviews:

Related manuals for TNS350

Brands by name

Popular brands

Toyota TNS350, Owner'S Manual

Search results

Summary of Contents for TNS350

Reviews:

Related manuals for TNS350

Brands by name

Popular brands