Toyota TNS350 Page 39 Owner'S Manual Download

Page: 39 / 260

TNS 350

BASIC FUNCTION

DUAL MAP

A map can be displayed split in two.
While on a different screen, touching

will display the dual map screen.

The screen shows the dual map. The map

on the left is the main map.
The right side map can be edited by

touching any specific point on the right side

map.

This screen can perform the following

procedures.
1. Changing the map scale

2. Displaying the POI icons

3. Show Traffic info. (See page 115.)

4. Changing the orientation of the map

Touch “OK” when you complete

editing.

The screen returns to the dual map

screen.

COMPASS MODE

Current vehicle position is indicated with a

compass, not with a map.
While on a different screen, touching

will display the compass mode screen.

Information about the destination and

current position, as well as a compass, is

displayed on the screen.
The destination mark is displayed in

the direction of the destination. When

driving refer to the longitude and latitude

coordinates, and the compass, to make

sure that your vehicle is headed in the

direction of the destination.

INFORMATION

When the vehicle travels out of the

coverage area, the guidance screen

changes to the compass mode

screen.

Summary of Contents for TNS350





































































































































































































































































Search results

Summary of Contents for TNS350

Reviews:

Related manuals for TNS350

Brands by name

Popular brands

Toyota TNS350, Owner'S Manual

Search results

Summary of Contents for TNS350

Reviews:

Related manuals for TNS350

Brands by name

Popular brands