Toyota TNS350 Page 67 Owner'S Manual Download

Page: 67 / 260

TNS 350

DESTINATION SEARCH

— Destination search by

“Phone no.”

1.  Push the “MENU” button.
2.  Touch “Destination”.
3.  Touch  “Phone  no.”  on  the  second

page of the “Destination” screen.

4. Input a telephone number.
5. After inputting a telephone number,

touch “OK”.

The screen changes and displays the map

location of the selected destination and

the road preference. (See “Starting route

guidance” on page 67.)
If there is more than one site having the

same number, the following screen will be

displayed.

INFORMATION

To set a memory point as a destination

using the phone number, the number

must be registered previously. (See

page 98.)

— Destination search by

“UK postal code”

Search by postal code is only available

when the “UK” is set as the search area.

1. Push the “MENU” button.
2. Touch “Destination”.
3. Touch “UK postal code” on the

second page of the “Destination”

screen.

4. Input the postal code and touch

“List”.

5. Touch the desired code.

The screen changes and displays the map

location of the selected destination and

the road preference. (See “Starting route

guidance” on page 67.)

Summary of Contents for TNS350





































































































































































































































































Search results

Summary of Contents for TNS350

Reviews:

Related manuals for TNS350

Brands by name

Popular brands

Toyota TNS350, Owner'S Manual

Search results

Summary of Contents for TNS350

Reviews:

Related manuals for TNS350

Brands by name

Popular brands