Toyota TNS350 Page 136 Owner'S Manual Download

Page: 136 / 260

OTHER FUNCTIONS

Indicates the condition of the
Bluetooth

connection.

“Blue”

indicates an excellent connection

to Bluetooth

“Yellow”

indicates a bad connection

to Bluetooth

, resulting in possible

deterioration of voice quality.

: No connection to Bluetooth

Indicates the amount of battery
charge left.

Empty

Full

It is not displayed while the Bluetooth

not connected.
The amount left does not always correspond

with the one of your cellular phone. This

system doesn't have a charging function.

Indicates the receiving area.

“Rm”

is displayed when receiving in

Roaming area.

“Ho”

is displayed when receiving in Home

area.

Indicates the level of reception.

Too bad

Excellent

The level of reception does not always

correspond with the one of your cellular

phone.

INFORMATION

This system supports the following

service.
●  HFP (Hands Free Profile) Ver. 1.5
●  OPP (Object Push Profile) Ver. 1.1
If  your  cellular  phone  does  not

support HFP, you cannot enter the

Bluetooth

phone, and take OPP

service individually.

Summary of Contents for TNS350





































































































































































































































































Search results

Summary of Contents for TNS350

Reviews:

Related manuals for TNS350

Brands by name

Popular brands

Toyota TNS350, Owner'S Manual

Search results

Summary of Contents for TNS350

Reviews:

Related manuals for TNS350

Brands by name

Popular brands