Toyota TNS350 Page 226 Owner'S Manual Download

Page: 226 / 260

AUDIO SYSTEM

● Supported iPods

The table below shows the tested iPods and iPhones. Depending on its condition, the

iPod or iPhone may not operate properly.

Model

Software version

iPod with video

1.3

iPod classic

1.1.2

iPod classic ('08, '09)

2.0.4

iPod nano 1st generation

1.3.1

iPod nano 2nd generation

1.1.3

iPod nano 3rd generation

1.1.3

iPod nano 4th generation

1.0.4

iPod nano 5th generation

1.0.2

iPod touch 1st generation (Ser.1.0)

1.1.5

iPod touch 1st generation (Ser.2.0)

2.2.1

iPod touch 1st generation (Ser.3.0)

3.1.3

iPod touch 2nd generation

4.0

iPod touch 3rd generation

4.0

iPhone

3.1.3

iPhone 3G

4.0.1

iPhone 3GS

4.0.1

INFORMATION

●  iPod is a trademark of Apple Inc., registered in the U.S. and other countries.
●  iPhone is a trademark of Apple Inc.
●  The use of iPods is authorized for the copying and playback of non−copyrighted

material or material for which legal copying and playback is authorized for

personal use by individuals. Copyright infringements are prohibited by law.

●

“Made for iPod” and “Made for iPhone” mean that an electronic accessory has

been designed to connect specifically to iPod, or iPhone, respectively, and has

been certified by the developer to meet Apple performance standards.

● Apple is not responsible for the operation of this device or its compliance with

safety and regulatory standards.

● For iPhones upgraded to iOS 4 or higher, some functions of the iPod may not

work properly.

Summary of Contents for TNS350





































































































































































































































































Search results

Summary of Contents for TNS350

Reviews:

Related manuals for TNS350

Brands by name

Popular brands

Toyota TNS350, Owner'S Manual

Search results

Summary of Contents for TNS350

Reviews:

Related manuals for TNS350

Brands by name

Popular brands