Toyota TNS350 Page 110 Owner'S Manual Download

Page: 110 / 260

ADVANCED FUNCTIONS

5. Touch the category button to be

changed.

6. Touch the category button to be

displayed on the “Display POI icons”

top screen.

7. Touch “OK”.

● 3D landmark

When the “3D landmark” feature is turned

on, the system will display the 3D landmark

on the map.
To turn the “3D landmark” mode on:

1. Push the “MENU” button.
2. Touch “Setting” on the “MENU”

screen.

3. Touch “Navigation” on the “Setting”

screen.

Then touch



to display page 2 of the

“Setup” screen.

4. Touch “On” of “3D landmark”.

The selected button is highlighted.

5. Touch “OK”.

Summary of Contents for TNS350





































































































































































































































































Search results

Summary of Contents for TNS350

Reviews:

Related manuals for TNS350

Brands by name

Popular brands

Toyota TNS350, Owner'S Manual

Search results

Summary of Contents for TNS350

Reviews:

Related manuals for TNS350

Brands by name

Popular brands