Toyota TNS350 Page 5 Owner'S Manual Download

Page: 5 / 260

TNS 350

CAUTION

● Exercise extreme caution if

operating the navigation system

while driving. Insufficient attention

to the road, traffic or weather

conditions may cause an accident.

● While driving, be sure to obey the

traffic regulations and maintain

awareness of the road conditions.

If a traffic sign on the road has

been changed, route guidance may

provide wrong information such as

the direction of a one way street.

While driving, listen to the voice instructions

as much as possible and glance at the

screen briefly and only when it is safe.

However, do not totally rely on voice

guidance. Use it just for reference. If

the system cannot determine the current

vehicle position correctly, there is a

possibility of incorrect, late, or non-voice

guidance.
The data in the system may occasionally

be incomplete. Road conditions, including

driving restrictions (no left turns, street

closures,

etc.)

frequently

change.

Therefore, before following any instruction

from the system, look to see whether the

instruction can be done safely and legally.
This system cannot warn about such things

as the safety of an area, condition of streets,

and availability of emergency services. If

unsure about the safety of an area, do not

drive into it.

Under no circumstances is

this system a substitute for the driver’s

personal judgement.

Use this system only in locations where it is

legal to do so. Some countries/provinces

may have laws prohibiting the use of video

and navigation screens next to the driver.

Summary of Contents for TNS350





































































































































































































































































Search results

Summary of Contents for TNS350

Reviews:

Related manuals for TNS350

Brands by name

Popular brands

Toyota TNS350, Owner'S Manual

Search results

Summary of Contents for TNS350

Reviews:

Related manuals for TNS350

Brands by name

Popular brands