Toyota TNS350 Page 232 Owner'S Manual Download

Page: 232 / 260

AUDIO SYSTEM

Touch the desired file number. The

SD/USB player will start playing the

selected file from the beginning.
“FOLDER”:

The folder list is displayed.

“Detail”:

Details of the file currently playing

is displayed.

● Searching for a desired file

While the SD memory card/USB memory

device is playing, touch “SCAN”

briefly.

“SCAN” appears on the screen. The SD/

USB player will play the next file in the

folder for 10 seconds, then scan again.

To select a file, touch

“SCAN”

once again.

If the SD/USB player reaches the end of

the folder, it will continue scanning from

file 1.
After all the files are scanned in one pass,

normal play resumes.

Summary of Contents for TNS350





































































































































































































































































Search results

Summary of Contents for TNS350

Reviews:

Related manuals for TNS350

Brands by name

Popular brands

Toyota TNS350, Owner'S Manual

Search results

Summary of Contents for TNS350

Reviews:

Related manuals for TNS350

Brands by name

Popular brands