Toyota TNS350 Page 193 Owner'S Manual Download

Page: 193 / 260

192

TNS 350

AUDIO SYSTEM

The touch-screen buttons for radio,

Bluetooth

audio, iPod, SD/USB player

and AUX operation are displayed on the

function button display screen when the

audio control mode is selected.

Touch them lightly and directly on the

screen.

The selected button is highlighted.

INFORMATION

● If the system does not respond to

a touch of a touch-screen button,

move your finger away from the

screen and then touch it again.

● You cannot operate dimmed touch-

screen buttons.

● Wipe off fingerprints on the surface

of the display using a glass cleaning

cloth.

● Displaying the audio control screen
IN AUDIO INFORMATION MODE

Touch audio information screen to display

the touch-screen button for audio system

(audio control mode).
You can select the function that enable

automatic return to the previous screen

from the audio screen. See “(a) Automatic

transition” on page 179 for details.

IN ANY

MODE

THAN AUDIO

INFORMATION MODE

Press the

“SOURCE”

button and touch

the desired touch-screen button to display

the touch-screen button for audio system

(audio control mode).
You can select the function that enable

automatic return to the previous screen

from the audio screen. See “(a) Automatic

transition” on page 179 for details.

Summary of Contents for TNS350





































































































































































































































































Search results

Summary of Contents for TNS350

Reviews:

Related manuals for TNS350

Brands by name

Popular brands

Toyota TNS350, Owner'S Manual

Search results

Summary of Contents for TNS350

Reviews:

Related manuals for TNS350

Brands by name

Popular brands