Toyota TNS350 Owner'S Manual Download

Page: 51 / 260

TNS 350

DESTINATION SEARCH

— Destination search by

“Address”

There are 2 ways to input a destination by

address.

1.  Push the “MENU” button.
2.  Touch “Destination”.
3.  Touch “Address” on the “Destination”

screen.

(a) Inputting a street name.

1. Input the street name.

2. Touch the touch-screen button of

the desired street name.

The screen changes and displays the map

location of the selected destination and

the road preference. (See “Starting route

guidance” on page 67.)
If the same street exists in more than one

town, the current screen changes to the

town list screen.

Summary of Contents for TNS350





































































































































































































































































Search results

Summary of Contents for TNS350

Reviews:

Related manuals for TNS350

Brands by name

Popular brands

Toyota TNS350, Owner'S Manual

Search results

Summary of Contents for TNS350

Reviews:

Related manuals for TNS350

Brands by name

Popular brands