Toyota TNS350 Page 31 Owner'S Manual Download

Page: 31 / 260

TNS 350

BASIC FUNCTION
Touching a button

Touch the following touch-screen buttons.



To shift to the next or previous

page.





To scroll up or down one item at a

time.

This expresses a displayed screen

position.





appears to the right of the

item name, the complete name is

too long for the display. Touch



to scroll to the next section of the

name.
Touch



to move to the beginning

of the name.

OPERATING IN THE PUSH MODE

Touch a touch-screen button to scroll

through the list. The function of each button

is the same as in the slide mode.

INFORMATION

Even if the slide mode is selected,

some screens cannot be operated by

flicking or dragging.

● Sorting

The order of a list displayed on the screen

can be rearranged.

TYPE A

1. Touch “Sort by”.

2. Select the desired sorting criteria.

Sorting criteria are as follows:

“Distance”

: To sort in the order of distance

from your current location.

“Date”

: To sort in the order of the date.

“Category”

: To sort in the order of the

category.

“Icon”

: To sort in the order of the icons.

“Name”

: To sort in the order by name.

“Attribute”

: To sort in the order by

attribute.

Summary of Contents for TNS350





































































































































































































































































Search results

Summary of Contents for TNS350

Reviews:

Related manuals for TNS350

Brands by name

Popular brands

Toyota TNS350, Owner'S Manual

Search results

Summary of Contents for TNS350

Reviews:

Related manuals for TNS350

Brands by name

Popular brands