Toyota TNS350 Page 183 Owner'S Manual Download

Page: 183 / 260

182

TNS 350

OTHER FUNCTIONS

Picture viewer

Picture viewer lets you display the JPEG

and BMP image data stored in the SD

memory card or the USB memory device. It

also allows you to specify an image as the

image displayed at the start of the system.

(a) Inserting/plugging

ejecting/

unplugging an SD memory card/

USB memory device

● Setting an SD memory card/USB

memory device

Remove the SD memory card before

inserting another SD memory card. For

details, see page 182. When the map SD

memory card is removed, the navigation

system cannot be used.

Insert an SD memory card, or open the

cover and plug a USB memory device

into the port.

After insertion, the set SD memory card/

USB memory device is automatically

loaded.

INFORMATION

● The image files that can be

displayed are files of 5 MB or less.

● With a single SD memory card or

USB memory device, up to 255

folders or up to 999 files can be

displayed.

● Ejecting/unplugging an SD memory

card/USB memory device

1. Push the “MENU” button.

2. Touch “Remove device”.

3. Touch “SD” or “USB”.

Summary of Contents for TNS350





































































































































































































































































Search results

Summary of Contents for TNS350

Reviews:

Related manuals for TNS350

Brands by name

Popular brands

Toyota TNS350, Owner'S Manual

Search results

Summary of Contents for TNS350

Reviews:

Related manuals for TNS350

Brands by name

Popular brands