Toyota TNS350 Page 106 Owner'S Manual Download

Page: 106 / 260

ADVANCED FUNCTIONS

Setup

Setting the items shown on the “Setup”

screen can be done.

1. Push the “MENU” button.

2. Touch “Setting”.

3. Touch “Navigation”.

4. Touch the items to be set.
5. Touch “OK” on the screen.

The previous screen will be displayed.

INFORMATION

To reset all setup items, touch

“Default”.

● Distance unit

Distance unit can be changed.

1. Push the “MENU” button.
2. Touch “Setting” on the “MENU”

screen.

3. Touch “Navigation” on the “Setting”

screen.

4. Touch “km” or “miles” of “Distance”

to choose the distance unit.

The selected button is highlighted.

5. Touch “OK”.

INFORMATION

This function is available only in

English. To switch language, see

“Selecting a language” on page 181.

Summary of Contents for TNS350





































































































































































































































































Search results

Summary of Contents for TNS350

Reviews:

Related manuals for TNS350

Brands by name

Popular brands

Toyota TNS350, Owner'S Manual

Search results

Summary of Contents for TNS350

Reviews:

Related manuals for TNS350

Brands by name

Popular brands