Toyota TNS350 Page 48 Owner'S Manual Download

Page: 48 / 260

DESTINATION SEARCH

4. Touch the touch-screen button

indicating the country to select a

search area.

5. Touch “OK” and the “Destination”

screen returns.

SELECTING THE SEARCH AREA ON

THE INPUT SCREEN

Change the search area in order to set a

destination from a different area by using

“Address”, “POI”, “Intersection” or “Phone

no.”.

1. Touch the search area touch-screen

button on the input screen to display

a map of the Europe.

The search area depends on the map SD

memory card installed in the navigation

system.

(For map database information

and updates, see “Map database

information and updates” on page 250.)

2. Touch the touch-screen button

indicating the country to select a

search area.

3. Touch “OK” and the previous screen

returns.

Summary of Contents for TNS350





































































































































































































































































Search results

Summary of Contents for TNS350

Reviews:

Related manuals for TNS350

Brands by name

Popular brands

Toyota TNS350, Owner'S Manual

Search results

Summary of Contents for TNS350

Reviews:

Related manuals for TNS350

Brands by name

Popular brands