Toyota TNS350 Page 141 Owner'S Manual Download

Page: 141 / 260

140

TNS 350

OTHER FUNCTIONS

● Reconnecting the Bluetooth

phone

Vehicles with smart entry and start

system—

If the Bluetooth

phone is disconnected

with a poor reception from the

Bluetooth

network when the “ENGINE

START STOP” switch is in the

ACCESSORY or IGNITION ON mode,

the system automatically reconnects

the Bluetooth

phone. In this case, the

connection result is not displayed.

If the Bluetooth

is disconnected on purpose

such as you turned your cellular phone off,

this does not happen. Reconnect it by the

following methods.

●

Select the Bluetooth

phone again.

● Enter the Bluetooth

phone.

Vehicles without smart entry and start

system—

If the Bluetooth

phone is disconnected

with a poor reception from the

Bluetooth

network when the engine

switch is in ACC or ON position, the

system automatically reconnects the

Bluetooth

phone. In this case, the

connection result is not displayed.

If the Bluetooth

is disconnected on purpose

such as you turned your cellular phone off,

this does not happen. Reconnect it by the

following methods.
● Select the Bluetooth

phone again.

● Enter the Bluetooth

phone.

— Call on the Bluetooth

phone

After you enter the Bluetooth

phone,

you can call by using hands-free system.

You can call using the 6 methods

described below.
● By dial
You can call by inputting the telephone

number.
1. Push the “MENU” button.

2. Touch “Telephone”.

3. Touch the desired key to input the

telephone number.

Each time you touch ◄, an inputted digit

is deleted.
When you touch

, the number you

called last is inputted.
Touch

or push of the steering wheel.

Summary of Contents for TNS350





































































































































































































































































Search results

Summary of Contents for TNS350

Reviews:

Related manuals for TNS350

Brands by name

Popular brands

Toyota TNS350, Owner'S Manual

Search results

Summary of Contents for TNS350

Reviews:

Related manuals for TNS350

Brands by name

Popular brands