Toyota TNS350 Page 119 Owner'S Manual Download

Page: 119 / 260

118

TNS 350

ADVANCED FUNCTIONS

INFORMATION

● Due to the dynamic nature of traffic

events, traffic information may not

match actual traffic conditions.

Also, favorable routes that detour

around the traffic congestion may

not be available. In such cases,

this navigation system cannot

avoid the traffic congestion, and/

or the new route may not be the

most desirable.

● When the “Traffic Information”

indicator is dimmed, “Auto avoid

traffic” and “Voice guidance” will

not operate.

(c) Traffic voice guidance

The system includes voice guidance for

traffic information. When there are some

traffic events on the guidance route, the

system will guide you using voice.

1. Push the “MENU” button to display

the “MENU” screen and touch

“Traffic”.

2. Touch “Voice guidance”.

INFORMATION

When the “Traffic Information”

indicator is dimmed, “Auto avoid

traffic” and “Voice guidance” will not

operate.

Summary of Contents for TNS350





































































































































































































































































Search results

Summary of Contents for TNS350

Reviews:

Related manuals for TNS350

Brands by name

Popular brands

Toyota TNS350, Owner'S Manual

Search results

Summary of Contents for TNS350

Reviews:

Related manuals for TNS350

Brands by name

Popular brands