Toyota TNS350 Owner'S Manual Download

Page: 109 / 260

108

TNS 350

ADVANCED FUNCTIONS
● Speed limit Warning

The legal speed limit on the road you are

travelling on is displayed.

The legal speed limit on the current
road

To turn the “Speed limit” mode on:

1. Push the “MENU” button.
2. Touch “Setting” on the “MENU”

screen.

3. Touch “Navigation” on the “Setting”

screen.

4. Touch “On” of “Speed limit”.

The selected button is highlighted.

5. Touch “OK”.

INFORMATION

The legal speed limit may not be

displayed, depending on the road.

● POI category change

(Display POI icons)

Select from among the 6 icons displayed

on the “Display POI icons” top screen, so

that setting of the icons to be displayed on

the map screen can be done easily.

1. Push the “MENU” button.
2. Touch “Setting” on the “MENU”

screen.

3. Touch “Navigation” on the “Setting”

screen.

Then touch



to display page 2 of the

“Setup” screen.

4. Touch “Chg. category” of “Display

POI icons”.

Summary of Contents for TNS350





































































































































































































































































Search results

Summary of Contents for TNS350

Reviews:

Related manuals for TNS350

Brands by name

Popular brands

Toyota TNS350, Owner'S Manual

Search results

Summary of Contents for TNS350

Reviews:

Related manuals for TNS350

Brands by name

Popular brands