Toyota TNS350 Page 127 Owner'S Manual Download

Page: 127 / 260

126

TNS 350

OTHER FUNCTIONS

— Dealer setting

It is possible to register a dealer in the

system. With dealer information registered,

route guidance to the dealer is available.

1. Push the “MENU” button.
2. Touch “Information” on the “MENU”

screen.

3. Touch “Maintenance” on the “Infor-

mation” screen.

4. Touch “Set dealer” on the “Main-

tenance” screen.

5. If the dealer has not been registered,

enter the location of the dealer in

the same way as for a destination

search.

(See “Destination search” on

page 46.)

When “Set dealer” registration is finished,

the edit dealer screen will be displayed.

6. Touch the touch-screen button to be

edited.

“Dealer”:

To enter the name of a dealer.

(See page 127.)

“Contact”:

To enter the name of a dealer

member. (See page 127.)

“Location”:

To set a location. (See

page 127.)

“Phone no.”:

To set a telephone number.

(See page 128.)

“Delete dealer”:

To delete the dealer

information displayed on the screen.

“Enter



”:

To set the displayed dealer

as a destination. (See “Starting route

guidance” on page 67.)

Summary of Contents for TNS350





































































































































































































































































Search results

Summary of Contents for TNS350

Reviews:

Related manuals for TNS350

Brands by name

Popular brands

Toyota TNS350, Owner'S Manual

Search results

Summary of Contents for TNS350

Reviews:

Related manuals for TNS350

Brands by name

Popular brands