Toyota TNS350 Owner'S Manual Download

Page: 125 / 260

124

TNS 350

OTHER FUNCTIONS

Maintenance information —

— Maintenance information

setting

When the navigation system is turned

on, the “Information” screen displays

when it is time to replace a part or certain

components. (See page 23.)

1. Push the “MENU” button.

2. Touch “Information”.

3. Touch “Maintenance”.

4. Touch the desired touch-screen

button.

For details of each touch-screen button, see

“INFORMATION ITEMS” on page 125.

“Delete all”

: To cancel all conditions which

have been inputted.

“Reset all”:

To reset the item which has

satisfied a condition.

“Set dealer”:

To register or edit dealer

information. (See “ — Dealer setting” on

page 126.)
If

“On”

is selected, the system gives

maintenance

information

with

the

“Information” screen and voice sound when

the system is turned on. (See page 23.)
If

“Off”

is selected, the “Information”

screen is disabled.
When the vehicle needs to be serviced, the

touch-screen button colour will change to

orange.

Summary of Contents for TNS350





































































































































































































































































Search results

Summary of Contents for TNS350

Reviews:

Related manuals for TNS350

Brands by name

Popular brands

Toyota TNS350, Owner'S Manual

Search results

Summary of Contents for TNS350

Reviews:

Related manuals for TNS350

Brands by name

Popular brands