Toyota Land Cruiser Prado 2013, Owner'S Manual

Page: 356 / 736

357
4-5. Using the driving support systems
LC150_OM_OM60K29E_(EE)
Likely cause Solution
 The guide lines are very far out of alignment
The camera position is out of align-
ment.
Have the vehicle inspected by any
authorized Toyota dealer or repairer,
or another duly qualified and
equipped professional.
• The vehicle is tilted (there is a
heavy load on the vehicle, tire
pressure is low due to a tire punc-
ture, etc.)
• The vehicle is used on an incline.
If this happens due to these causes,
it does not indicate a malfunction.
Back up while visually checking the
vehicle’s surroundings.
 The estimated course lines move even though the steering wheel is
straight
There is a malfunction in the signals
being output by the steering sensor.
Have the vehicle inspected by any
authorized Toyota dealer or repairer,
or another duly qualified and
equipped professional.
 Guide lines are not displayed
The back door is open.
Close the back door.
If this does not resolve the symptom,
have the vehicle inspected by any
authorized Toyota dealer or repairer,
or another duly qualified and
equipped professional.
 “System is initializing.” is displayed
• The battery has been reinstalled.
• The steering wheel has been
moved while the battery was being
reinstalled.
• Battery power is low.
• The steering sensor has been
reinstalled.
• There is a malfunction in the sig-
nals being output by the steering
sensor.
Stop the vehicle, and turn the steer-
ing wheel as far as it will go to the
left and right. (Selecting “?” on the
screen displays the operating proce-
dure above.)
If this does not resolve the symptom,
have the vehicle inspected by any
authorized Toyota dealer or repairer,
or another duly qualified and
equipped professional.
• On the system initialization
screen, touch the “?” button to dis-
play the operating procedure.