Toyota Land Cruiser Prado 2013, Owner'S Manual, Page: 158 / 736

159
3-2. Opening, closing and locking the doors
LC150_OM_OM60K29E_(EE)

The lock sensor may not work properly if it comes into contact with ice,
snow, mud, etc. Clean the lock sensor and attempt to operate it again, or
use the lock sensor on the lower part of the door handle.

Fingernails may scrape against the door during operation of the door han-
dle. Be careful not to injure fingernails or damage the surface of the door.
 A sudden approach to the effective range or door handle may prevent the
doors from being unlocked. In this case, return the door handle to the origi-
nal position and check that the doors unlock before pulling the door handle
again.

Unlocking the vehicle may take more time if another electronic key is within
the effective range.
 When the vehicle is not driven for extended periods

To prevent theft of the vehicle, do not leave the electronic key within 2 m (6
ft.) of the vehicle.
 The smart entry & start system can be deactivated in advance. (

P. 705)
 To operate the system properly
Make sure to carry the electronic key when operating the system. Do not get
the electronic key too close to the vehicle when operating the system from the
outside of the vehicle.
Depending on the position and holding condition of the electronic key, the key
may not be detected correctly and the system may not operate properly. (The
alarm may go off accidentally, or the door lock prevention function may not
operate.)
 If the smart entry & start system does not operate properly

Locking and unlocking the doors: Use the mechanical key. (

P. 660)

Starting the engine:

P. 661