manualshive.com logo in svg

Toyota Land Cruiser Prado 2013, Owner'S Manual, Page: 721 / 736

Share
Download
Toyota Land Cruiser Prado 2013 Owner'S Manual Download Page 721

722

What to do if... (Troubleshooting)

LC150_OM_OM60K29E_(EE)

Did anyone inside the vehicle open a door during setting the alarm? 
The sensor detects it and the alarm sounds. (

P. 92)

To stop the alarm, turn the engine switch to IGNITION ON mode or
start the engine.

Is the message displayed on the multi-information display?
Check the message on the multi-information display. (

P. 607)

When a warning light turns on or a warning message is displayed, refer to
P. 595, 607.

Vehicles without a spare tire 
Stop the vehicle in a safe place and repair the flat tire temporarily with the
emergency tire puncture repair kit. (

P. 642)

Vehicles with a spare tire
Stop the vehicle in a safe place and replace the flat tire with the spare tire.
(

P. 623)

Try the procedure for when the vehicle becomes stuck in mud, dirt, or
snow. (

P. 674)

An alarm is activated and the horn sounds (if equipped)

A warning buzzer sounds when leaving the vehicle 
(vehicles with a smart entry & start system)

A warning light turns on or a warning message is displayed

When a problem has occurred

If you have a flat tire

The vehicle becomes stuck

Summary of Contents for Land Cruiser Prado 2013

































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments