manualshive.com logo in svg

Toyota Land Cruiser Prado 2013, Owner'S Manual

Share
Download
Toyota Land Cruiser Prado 2013 Owner'S Manual Download Page 318

319

4-5. Using the driving support systems

LC150_OM_OM60K29E_(EE)

You can change the buzzer sound volume and the screen operating
conditions.

Press the “SETUP” button.
Select “Vehicle” on the screen.
Select the desired item.

The buzzer sound volume can be adjusted.

On or off can be selected for Toyota parking assist-sensor dis-
play.

Front or rear center sensors display and tone indication can be
set.

The Toyota parking assist-sensor can be operated when

Front corner sensors:
• The engine switch is in the “ON” position (vehicles without a smart entry

& start system) or the engine switch is turned to IGNITION ON mode
(vehicles with a smart entry & start system).

• The shift lever is in a position other than P.
• The vehicle speed is less than approximately 10 km/h (6 mph).

(At any speed when the shift lever is in R)

Front center sensors:
• The engine switch is in the “ON” position (vehicles without a smart entry

& start system) or the engine switch is turned to IGNITION ON mode
(vehicles with a smart entry & start system).

• The shift lever is in a position other than P or R.
• The vehicle speed is less than about 10 km/h (6 mph).

Rear corner and rear center sensors:
• The engine switch is in the “ON” position (vehicles without a smart entry

& start system) or the engine switch is turned to IGNITION ON mode
(vehicles with a smart entry & start system).

• The shift lever is in R.

Toyota parking assist-sensor display

When an obstacle is detected while the Toyota parking assist monitor or
Multi-terrain Monitor is in use, the warning indicator will appear in the top right
or left of the screen even if the display setting has been set to off.

Setting up Toyota parking assist-sensor (vehicles with a naviga-
tion system or a multimedia system)

1

2

3

Summary of Contents for Land Cruiser Prado 2013

































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands