manualshive.com logo in svg

Toyota Land Cruiser Prado 2013, Owner'S Manual, Page: 248 / 736

Share
Download
Toyota Land Cruiser Prado 2013 Owner'S Manual Download Page 248

249

4-2. Driving procedures

LC150_OM_OM60K29E_(EE)

Electronic key battery depletion

P. 160

Conditions affecting operation

P. 157

Note for the entry function

P. 158

If the engine does not start

The engine immobilizer system may not have been deactivated. (

P. 83) 

Contact any authorized Toyota dealer or repairer, or another duly qualified
and equipped professional.

Steering lock

After turning the engine switch off and opening and closing the doors, the
steering wheel will be locked due to the steering lock function. Operating the
engine switch again automatically cancels the steering lock.

When the steering lock cannot be released

Steering lock motor overheating prevention

To prevent the steering lock motor from overheating, the motor may be sus-
pended if the engine is turned on and off repeatedly in a short period of time.
In this case, refrain from running the engine. After about 10 seconds, the
steering lock motor will resume functioning.

When the engine switch indicator flashes in amber

The system may be malfunctioning. Have the vehicle inspected by any autho-
rized Toyota dealer or repairer, or another duly qualified and equipped profes-
sional immediately.

If the electronic key battery is depleted

P. 559

If the smart entry & start system has been deactivated in a customized
setting

P. 660

The green indicator light on the engine
switch will flash and a message will be
shown on the multi-information display.
Press the engine switch again while turn-
ing the steering wheel left and right.

Summary of Contents for Land Cruiser Prado 2013

































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments