manualshive.com logo in svg

Toyota Land Cruiser Prado 2013, Owner'S Manual, Page: 209 / 736

Share
Download
Toyota Land Cruiser Prado 2013 Owner'S Manual Download Page 209

210

3-5. Opening and closing the windows and moon roof

3

Index

LC150_OM_OM60K29E_(EE)

Release “

” on the 

 once and then press and hold “

” on the 

again.

*

1

The moon roof will pause for approximately 10 seconds in the tilt up posi-
tion.

*

2

 Then it will adjust slightly and pause for approximately 1 second.

Finally, it will tilt down, open and close.
Check to make sure that the moon roof is completely closed and then
release the switch.

*

1

: If the switch is released at the incorrect time, the procedure will have to

be performed again from the beginning.

*

2

: If the switch is released after the above mentioned 10 second pause,

automatic operation will be disabled. In that case, press and hold “

” on

the 

 or “

” on the 

 and the moon roof will tilt up and pause for

approximately 1 second. Then it will tilt down, open and close. Check to
make sure that the moon roof is completely closed and then release the
switch.

If the moon roof does not fully close even after performing the above proce-
dure correctly, have the vehicle inspected by any authorized Toyota dealer or
repairer, or another duly qualified and equipped professional.

Customization

Settings (e.g. linked door lock operation) can be changed. 
(Customizable features 

P. 705)

3

4

Summary of Contents for Land Cruiser Prado 2013

































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments