manualshive.com logo in svg

Toyota Land Cruiser Prado 2013, Owner'S Manual, Page: 145 / 736

Share
Download
Toyota Land Cruiser Prado 2013 Owner'S Manual Download Page 145

146

3-2. Opening, closing and locking the doors

3

Index

LC150_OM_OM60K29E_(EE)

CAUTION

Operating the back door

Do not pull on the back door damper stay to close the back door, and do
not hang on the back door damper stay.
Doing so may cause hands to be caught or the back door damper stay to
break, causing an accident.

If a bicycle carrier or similar heavy object is attached to the back door, it
may suddenly shut again after being opened, causing someone’s hands,
head or neck to be caught and injured. When installing an accessory part
to the back door, using a genuine Toyota part is recommended.

The back door may close if the back
door stopper is not locked (specifically,
when using the luggage compartment
with the back door kept open at your
desired position). It is more difficult to
open or close the back door on an
incline than on a level surface, so
beware of the back door unexpectedly
opening or closing by itself. Make sure
that the back door stopper is locked and
secure before using the luggage com-
partment.

When closing the back door, take extra
care to prevent your fingers etc. from
being caught.

When closing the back door, make sure
to press it lightly on its outer surface. If
the back door handle is used to fully
close the back door, it may result in
hands or arms being caught.

Summary of Contents for Land Cruiser Prado 2013

































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments