manualshive.com logo in svg

Toyota Land Cruiser Prado 2013, Owner'S Manual, Page: 662 / 736

Share
Download
Toyota Land Cruiser Prado 2013 Owner'S Manual Download Page 662

663

8-2. Steps to take in an emergency

LC150_OM_OM60K29E_(EE)

Stopping the engine

Vehicles with an automatic transmission

Shift the shift lever to P and press the engine switch as you normally do when
stopping the engine.

Vehicles with a manual transmission

Shift the shift lever to N and press the engine switch as you normally do when
stopping the engine.

Replacing the key battery

As the above procedure is a temporary measure, it is recommended that the
electronic key battery be replaced immediately when the battery is depleted.
(

P. 560)

Alarm (if equipped)

Using the mechanical key to lock the doors will not set the alarm system.
If a door is unlocked using the mechanical key when the alarm system is set,
the alarm may be triggered. (

P. 92)

Changing engine switch modes

Vehicles with an automatic transmission

Within 10 seconds of the buzzer sounding, release the brake pedal and press
the engine switch.
The engine does not start and modes will be changed each time the switch is
pressed. (

P. 247)

Vehicles with a manual transmission

Within 10 seconds of the buzzer sounding, release the clutch pedal and press
the engine switch.
The engine does not start and modes will be changed each time the switch is
pressed. (

P. 247)

When the electronic key does not work properly

Make sure that the smart entry & start system has not been deactivated in the
customization setting. If it is off, turn the function on.
(Customizable features: 

P. 705)

Summary of Contents for Land Cruiser Prado 2013

































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments