manualshive.com logo in svg

Toyota Land Cruiser Prado 2013, Owner'S Manual, Page: 392 / 736

Share
Download
Toyota Land Cruiser Prado 2013 Owner'S Manual Download Page 392

393

5-1. Basic Operations

LC150_OM_OM60K29E_(EE)

Audio system types

Vehicles with a navigation system or a multimedia system

Refer to the “Navigation system owner’s manual”.

Vehicles without a navigation system or a multimedia system

CD player with AM/FM radio

This illustration is for left-hand drive vehicles. Some button positions
are reversed for right-hand drive vehicles.

Using cellular phones

Interference may be heard through the audio system’s speakers if a cellular
phone is being used inside or close to the vehicle while the audio system is
operating.

: If equipped

NOTICE

To prevent battery discharge

Do not leave the audio system on longer than necessary with the engine
stopped.

To avoid damaging the audio system

Take care not to spill drinks or other fluids over the audio system.

Summary of Contents for Land Cruiser Prado 2013

































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments