Toyota Land Cruiser Prado 2013, Owner'S Manual

Page: 658 / 736

659
8-2. Steps to take in an emergency
LC150_OM_OM60K29E_(EE)
The engine starting system may be malfunctioning due to an electrical
problem such as an open circuit or a blown fuse. However, an interim
measure is available to start the engine. (

P. 659)
One of the following may be the cause of the problem:
 One or both of the battery terminals may be disconnected.
 The battery may be discharged. (

P. 664)
 There may be a malfunction in the steering lock system. (vehicles
with a smart entry & start system)
Contact any authorized Toyota dealer or repairer, or another duly qualified
and equipped professional if the problem cannot be repaired, or if repair
procedures are unknown.
When the engine does not start, the following steps can be used as an
interim measure to start the engine if the engine switch is functioning
normally.
Set the parking brake.
Put the shift lever in P (automatic transmission) or N (manual trans-
mission).
Set the engine switch to the ACCESSORY mode.
Push and hold the engine switch for about 15 seconds while
depressing the brake pedal (automatic transmission) or brake and
clutch pedals (manual transmission) firmly.
Even if the engine can be started using the above steps, the system
may be malfunctioning. Have the vehicle checked by any authorized
Toyota dealer or repairer, or another duly qualified and equipped pro-
fessional.
The starter motor does not turn over (vehicles with a smart entry
& start system).
The starter motor does not turn over, the interior lights and head-
lights do not turn on, or the horn does not sound.
Emergency start function (vehicles with a smart entry & start
system)
1
2
3
4