manualshive.com logo in svg

Toyota Land Cruiser Prado 2013, Owner'S Manual, Page: 113 / 736

Share
Download
Toyota Land Cruiser Prado 2013 Owner'S Manual Download Page 113

114

2. Instrument cluster

2

Instrument cluster

LC150_OM_OM60K29E_(EE)

When disconnecting and reconnecting battery terminals

The following information data will be reset:

Trip meter

Average fuel consumption

Average vehicle speed

If the trip meter was displayed last, the ODO screen will be displayed after
resetting.

Customization

Settings (e.g. available language) can be changed. 
(Customizable features 

P. 706)

CAUTION

The multi-information display at low temperatures (vehicles with an
automatic transmission)

Allow the interior of the vehicle to warm up before using the multi-informa-
tion display. At extremely low temperatures, the multi-information display
monitor may respond slowly, and display changes may be delayed.
For example, there is a lag between the driver’s shifting and the new gear
number appearing on the display. This lag could cause the driver to down-
shift again, causing rapid and excessive engine braking and possibly an
accident resulting in death or serious injury.

NOTICE

The multi-information display at low temperatures

Allow the interior of the vehicle to warm up before using the multi-informa-
tion display. At extremely low temperatures, the multi-information display
monitor may respond slowly, and display changes may be delayed.

Summary of Contents for Land Cruiser Prado 2013

































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments