Toyota Land Cruiser Prado 2013 Page 34 Owner'S Manual Download

Page: 34 / 736

1-1. For safe use

LC150_OM_OM60K29E_(EE)

For safety drive

Adjust the angle of the seat-
back so that you are sitting
straight up and so that you do
not have to lean forward to
steer. (



P. 170)

Adjust the seat so that you can
depress the pedals fully and so
that your arms bend slightly at
the elbow when gripping the
steering wheel. (



P. 170)

Lock the head restraint in place with the center of the head restraint
closest to the top of your ears. (



P. 192)

Wear the seat belt correctly. (



P. 37)

Make sure that all occupants are wearing their seat belts before driv-
ing the vehicle. (



P. 37)

Use a child restraint system appropriate for the child until the child
becomes large enough to properly wear the vehicle’s seat belt.
(



P. 58)

For safe driving, adjust the seat and mirror to an appropriate
position before driving.

Correct driving posture

Correct use of the seat belts

Summary of Contents for Land Cruiser Prado 2013

































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Land Cruiser Prado 2013

Reviews:

Related manuals for Land Cruiser Prado 2013

Brands by name

Popular brands

Toyota Land Cruiser Prado 2013, Owner'S Manual

Search results

Summary of Contents for Land Cruiser Prado 2013

Reviews:

Related manuals for Land Cruiser Prado 2013

Brands by name

Popular brands