manualshive.com logo in svg

Toyota Land Cruiser Prado 2013, Owner'S Manual, Page: 300 / 736

Share
Download
Toyota Land Cruiser Prado 2013 Owner'S Manual Download Page 300

301

4-5. Using the driving support systems

LC150_OM_OM60K29E_(EE)

Pulling the lever toward you
cancels the cruise control.

The speed setting is also canceled
when the brakes are applied.

Pushing the lever up resumes
the cruise control and returns
vehicle speed to the set speed.

Resuming is available when the
vehicle speed is more than approx-
imately 40 km/h (25 mph).

This mode employs a radar sensor to detect the presence of vehicles
up to approximately 120 m (400 ft.) ahead, determines the current
vehicle-to-vehicle following distance, and operates to maintain a suit-
able following distance from the vehicle ahead.

Note that vehicle-to-vehicle distance will close in when traveling on
long downhill slopes.

Canceling and resuming the speed control

1

2

Driving in vehicle-to-vehicle distance control mode

Summary of Contents for Land Cruiser Prado 2013

































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments