manualshive.com logo in svg

Toyota Land Cruiser Prado 2013, Owner'S Manual, Page: 611 / 736

Share
Download
Toyota Land Cruiser Prado 2013 Owner'S Manual Download Page 611

612

8-2. Steps to take in an emergency

LC150_OM_OM60K29E_(EE)

8

W

hen
 troub

le 

arise

s

Indicates that engine oil level is low

A buzzer also sounds.

Check the level of engine oil, and add if
necessary.

(If equipped)

Indicates a malfunction in the LED headlights
The LED headlights will not normally illuminate
when there is a malfunction, however it may be
able to illuminate depending on the nature of the
problem

A buzzer also sounds.

Have the vehicle inspected by any autho-
rized Toyota dealer or repairer, or another
duly qualified and equipped professional
immediately.

(If equipped)

Indicates a malfunction in the automatic headlight
leveling system

A buzzer also sounds.

Have the vehicle inspected by any autho-
rized Toyota dealer or repairer, or another
duly qualified and equipped professional
immediately.

(If equipped)

Indicates that the washer fluid level is low

Add washer fluid.

(If equipped)

Indicates that the amount of accumulated water
in the fuel filter has reached the specified level

A buzzer also sounds.

Drain the water from the fuel filter. 
(

P. 539)

Indicates that remaining fuel is approximately 10
L (2.6 gal., 2.2 Imp. gal.) or less

A buzzer also sounds.

Refuel the vehicle.

Warning message

Details/Actions

Summary of Contents for Land Cruiser Prado 2013

































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments