manualshive.com logo in svg

Toyota Land Cruiser Prado 2013, Owner'S Manual, Page: 151 / 736

Share
Download
Toyota Land Cruiser Prado 2013 Owner'S Manual Download Page 151

152

3-2. Opening, closing and locking the doors

3

Index

LC150_OM_OM60K29E_(EE)

CAUTION

Operating the glass hatch

Do not pull on the glass hatch damper stay to close the glass hatch, and
do not hang on the glass hatch damper stay.
Doing so may cause hands to be caught or the glass hatch damper stay to
break, causing an accident.

Do not attach any accessories other than genuine Toyota parts to the
glass hatch. Such additional weight on the glass hatch may cause the
glass hatch to suddenly shut again after it is opened.

The glass hatch may close if it is not
opened fully. It is more difficult to open
or close the glass hatch on an incline
than on a level surface, so beware of
the glass hatch unexpectedly opening
or closing by itself. Make sure that the
glass hatch is fully open and secure
before using the luggage compartment.

When closing the glass hatch, take
extra care to prevent your fingers etc.
from being caught.

When closing the glass hatch, make
sure to press it lightly on its outer sur-
face.

Summary of Contents for Land Cruiser Prado 2013

































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments